0212 652 25 50 Hafta İçi 08:30 - 17:30

Knowledge Base

Sık karşılaşılan yazıcı arızaları, kalibrasyon adımları ve pratik çözümler

Ink/adhesive residue may have accumulated on the printhead or a printhead dot may be burned out. Clean the head with isopropyl alcohol. If the line persists, printhead replacement is required.

The label sensor may not be aligned with the label gap. Center the sensor and run Label Calibration from the printer menu.

Printhead pressure settings may be uneven between left and right sides. Equalize the head pressure latches and ensure the ribbon sits flat.